DIRECT TORQUE CONTROL (DTC) PROJECTS Best Electrical Engineering Projects

Direct torque control (DTC) is one method used in variable frequency drives to control the torque (and thus finally the speed) of three-phase AC electric motors. This involves calculating an estimate of the motor’s magnetic flux and torque based on the measured voltage and current of the motor.

Stator flux linkage is estimated by integrating the stator voltages. Torque is estimated as a cross product of estimated stator flux linkage vector and measured motor current vector. The estimated flux magnitude and torque are then compared with their reference values. If either the estimated flux or torque deviates too far from the reference tolerance, the transistors of the variable frequency drive are turned off and on in such a way that the flux and torque errors will return in their tolerant bands as fast as possible. Thus direct torque control is one form of the hysteresis or bang-bang control.

  1. Analysis and performance of the induction motor under hysteresis current controlled DTC
  2. Simplified SVPWM Algorithm for Neutral Point Clamped 3-level Inverter fed DTC-IM Drive
  3. A Constant Switching Frequency based Direct Torque Control Method for Interior Permanent Magnet Synchronous Motor Drives
  4. Transient and Steady States Analysis of Traction Motor Drive with Regenerative Braking and Using Modified Direct Torque Control (SVM-DTC)
  5. Improved Direct Torque Control of Induction Motor
  6. Direct torque control of squirrel cage induction motor for optimum current ripple using three level inverter
  7. Study of Induction Motor Drive with Direct Torque Control Scheme and Indirect Field Oriented Control Scheme Using Space Vector Modulation
  8. Direct Torque Control of Induction Motor Drive with Flux Optimization
  9. Direct Torque Control of Induction Motor With Constant Switching Frequency
  10. Direct Torque Control Based on Space Vector Modulation with Adaptive Stator Flux Observer for Induction Motors
  11. Novel Direct Torque Control Based On Space Vector Modulation With Adaptive Stator Flux Observer For Induction Motors
  12. Study On Speed Sensorless SVM-DTC System Of PMSM
  13. Direct Torque Control of Induction Motors with Fuzzy Minimization Torque Ripple
  14. PMSM Speed Sensor less Direct Torque Control Based On EKF
  15. Simulink Model of Direct Torque Control of Induction Machine
  16. High Performance of Space Vector Modulation Direct Torque Control SVM-DTC Based on Amplitude Voltage and Stator Flux Angle

 

 

Leave a Reply

Your email address will not be published.