Final year electrical projects in andhra pradesh

Final year electrical projects in andhra pradesh 2017/2018

Software Used: Matlab/Simulink

Areas : Power Electronics and Drives, Power Systems, Renewable Energy and sources, etc

Download

Contact us:

email: asokatechnologies@gmail.com

website: www.asokatechnologies.in

Asoka technologies provide Final year electrical projects in andhra pradesh

ELECTRICAL ENGINEERING is a field of engineering that generally deals with the study and application of electricity, electronics, and electro magnetism. This field first became an identifiable occupation in the later half of the 19th century after commercialization of the electric telegraph, the telephone, and electric power distribution and use. Subsequently, broad casting and recording media made electronics part of daily life. The invention of the transistor, and later the integrated circuit, brought down the cost of electronics to the point they can be used in almost any household object.

Electrical engineering has now subdivided into a wide range of sub fields `including electronics, digital computers, power engineering, tele communications, control systems, radio-frequency engineering, signal processing, instrumentation, and microelectronics. Many of these sub disciplines overlap and also overlap with other engineering branches, spanning a huge number of specializations such as hardware engineering, power electronics, electro magnetics & waves, microwave engineering, nanotechnology, electro chemistry, renewable energies, mechatronics, electrical materials science, and many more.

POWER ELECTRONICS is the application of solid-state electronics to the control and conversion of electric power. The first high power electronic devices were mercury-arc valves. In modern systems the conversion is performed with semiconductor switching devices such as diodes, thyristors and transistors, pioneered by R. D. Middlebrook and others beginning in the 1950s. In contrast to electronic systems concerned with transmission and processing of signals and data, in power electronics substantial amounts of electrical energy are processed. An AC/DC converter (rectifier) is the most typical power electronics device found in many consumer electronic devices, e.g. television sets, personal computers, battery chargers, etc. The power range is typically from tens of watts to several hundred watts. In industry a common application is the variable speed drive (VSD) that is used to control an induction motor. The power range of VSDs start from a few hundred watts and end at tens of megawatts.

electric machines projects in hyderabad

electric machines projects.

electric machines projects In electrical engineeringelectric machine is a general term for machines using electromagnetic forces, such as electric motorselectric generators, and others. They are electromechanical energy converters: an electric motor converts electricity to mechanical power while an electric generator converts mechanical power to electricity. The moving parts in a machine can be rotating (rotating machines) or linear (linear machines). Besides motors and generators, a third category often included is transformers, which although they do not have any moving parts are also energy converters, changing the voltage level of an alternating current.[1]

electric machines projects

New Electrical Projects for Electrical Engineering Students

new electrical projects

new electrical projects Electrical engineering is an engineering stream that comprises study and understanding about electricity and electronics. The main work of electrical engineers is to distribute energy for different devices. They have to use their knowledge and skills of electrical engineering for solving various technical problems. Some of the works that an electrical engineer is capable of doing on some specified electrical devices or products include developing GPS systems and airline navigation systems; designing power generating and transmitting system like a power plant of a wind farmhouse, and so on.

Electricity

So what is electricity and where does it come from? More importantly, why is carpet, socks and a doorknob a bad combination? In its simplest terms, electricity is the movement of charge, which is considered by convention to be, from positive to negative. No matter how the charge is created, chemically (like in batteries) or physically (friction from socks and carpet), the movement of the discharge is electricity.

Current

This flow of electrical charge is referred to as electric current. There are two types of current, direct current (DC) and alternating current (AC). DC is current that flows in one direction with a constant voltage polarity while AC is current that changes direction periodically along with its voltage polarity. Thomas Edison and Alessandro Volta were pioneers in DC current and wrote much of electricity’s history. But as societies grew the use of DC over long transmission distances became too inefficient. Nikola Tesla changed all that with the invention of alternating current electrical systems. With AC it is possible to produce the high voltages needed for long transmissions. Therefore today, most portable devices use DC power while power plants produce AC.

Ohms Law

The most fundamental law in electricity is Ohm’s law or V=IR. The V is for voltage, which means the potential difference between two charges.

new electrical projects

Top Electrical Projects Ideas for Engineering Students

Approximately each & every technology in modern living relies on electrical engineering in some or the other way. Electrical engineers labor with energy (together with light, electricity, sound, and electro-magnetic fields) and intellect (data, modeling, algorithms, simulation and control). Even though many of these occurrences are undetectable, they broaden the potential of surviving in modern world. With innovative projects and ideas dispensing almost every other day, it becomes necessary for electronics & electric students to position a practicable and within your means electrical projects for their submission which can be carried out by them simply.

Design of External Inductor for Improving Performance of Voltage Controlled DSTATCOM

An Enhanced Single Phase Step-Up Five-Level  Inverter

A Hybrid-STATCOM with Wide Compensation Range and Low DC-Link Voltage

A Capacitor Voltage-Balancing Method for Nested Neutral Point Clamped (NNPC) Inverter

T-type direct AC/AC converter structure

Modular Multilevel Converter Circulating Current Reduction Using Model Predictive Control

Parallel inductor multilevel current source  inverter with energy – recovery scheme for inductor currents balancing

Open-Circuit Fault-Tolerant Control for Outer Switches of Three-Level Rectifiers in Wind Turbine Systems

Enhancing DFIG wind turbine during three phase fault using parallel interleaved converters and dynamic resistor

Load Model for Medium Voltage Cascaded H-Bridge Multi-Level Inverter Drive Systems

Development and Comparison of an Improved Incremental Conductance Algorithm for Tracking the MPP of a Solar PV Panel

Impact of Switching Harmonics on Capacitor Cells Balancing in Phase-Shifted PWM Based Cascaded H-Bridge STATCOM

Effect of circulating current on input line current of 12-pulse rectifier with active inter-phase reactor

Modular Multilevel Converter-Based Bipolar High-Voltage Pulse Generator With Sensorless Capacitor Voltage Balancing Technique

Power-Electronics-Based Energy Management System With Storage

Modulation and Control of Transformerless UPFC

A Hybrid Simulation Model for VSC HVDC

Switching Control of Buck Converter Based on Energy Conservation Principle

A Three-Phase Multilevel HybridSwitched-Capacitor PWM PFC Rectifier for High-Voltage-Gain Applications

A dc-Side Sensorless Cascaded H-Bridge Multilevel Converter Based PhotovoltaicSystem

Phase angle calculation dynamics of type-4wind turbines in rms simulations during severe voltage dips

A Multi-Level Converter with a Floating Bridge for Open-Ended Winding Motor Drive Applications

Model Predictive Control of Quasi-Z-Source Four-Leg Inverter

Using Multiple Reference Frame Theory for Considering Harmonics in Average-Value Modeling of Diode Rectifiers

Cascaded Dual Model Predictive Control of an Active Front-End Rectifier

Simple Time Averaging Current Quality Evaluation of a Single-Phase Multilevel PWM Inverter

Latest IEEE Electrical Projects

2016-17 IEEE Electrical Projects

1.Generation of Higher Number of Voltage Levels by stacking inverters of lower multilevel structure with low voltage devices for drives

2.A Novel Multilevel Multi-Output Bidirectional Active Buck PFC Rectifier

3.Optimal Pulse width Modulation of Medium-Voltage Modular Multilevel Converter

4.Novel Family of Single-Phase Modified Impedance-Source Buck-Boost Multilevel Inverters with Reduced Switch Count

5.Adaptive Neuro Fuzzy Inference System Least Mean Square Based Control Algorithm for DSTATCOM

6.An Islanding Detection Method for Inverter-Based Distributed Generators Based on the Reactive Power Disturbance

7.Quasi-Z-Source Inverter With a T-Type Converter in Normal and Failure Mode

8.Real-Time Implementation of Model Predictive Control on 7-Level Packed U-Cell Inverter

9.High frequency inverter topologies integrated with the coupled inductor bridge arm

10.Dynamic voltage restorer employing multilevel cascaded H-bridge inverter

Electrical engineering is a field of engineering that generally deals with the study and application of electricity, electronics, and electro magnetism. This field first became an identifiable occupation in the later half of the 19th century after commercialization of the electric telegraph, the telephone, and electric power distribution and use. Subsequently, broad casting and recording media made electronics part of daily life. The invention of the transistor, and later the integrated circuit, brought down the cost of electronics to the point they can be used in almost any household object.

Electrical engineering has now subdivided into a wide range of sub fields including electronics, digital computers, power engineering, tele communications, control systems, radio-frequency engineering, signal processing, instrumentation, and microelectronics. Many of these sub disciplines overlap and also overlap with other engineering branches, spanning a huge number of specializations such as hardware engineering, power electronics, electro magnetics & waves, microwave engineering, nanotechnology, electro chemistry, renewable energies, mechatronics, electrical materials science, and many more.

Electrical engineers typically hold a degree in electrical engineering or electronic engineering. Practicing engineers may have professional certification and be members of a professional body. Such bodies include the Institute of Electrical and Electronics Engineers (IEEE) and the Institution of Engineering and Technology (professional society) (IET).

Electrical engineers work in a very wide range of industries and the skills required are likewise variable. These range from basic circuit theory to the management skills required of a project manager. The tools and equipment that an individual engineer may need are similarly variable, ranging from a simple voltmeter to a top end analyzer to sophisticated design and manufacturing software.

 

post

Solar Energy Projects

Solar energy is radiant light and heat from the Sun. It is harnessed using a range of ever-evolving technologies. Such as solar heating, photovoltaics, solar thermal energy, solar architecture, molten salt power plants and artificial photosynthesis.

It is an important source of renewable energy and its technologies are broadly characterized as either passive solar or active solar. Depending on how they capture and distribute solar energy or convert it into solar power. Active solar techniques include the use of photovoltaic systems, concentrated solar power and solar water heating to harness the energy. Passive solar techniques include orienting a building to the Sun. Selecting materials with favorable thermal mass or light-dispersing properties, and designing spaces that naturally circulate air.

The large magnitude of solar energy available makes it a highly appealing source of electricity. The United Nations Development Programme in its 2000 World Energy Assessment found that the annual potential of solar energy was 1,575–49,837 exajoules (EJ). This is several times larger than the total world energy consumption, which was 559.8 EJ in 2012.

In 2011, the International Energy Agency said that “the development of affordable, inexhaustible and clean solar energy technologies will have huge longer-term benefits. It will increase countries’ energy security through reliance on an indigenous, inexhaustible and mostly import-independent resource, enhance sustainability, reduce pollution, lower the costs of mitigating global warming, and keep fossil fuel prices lower than otherwise. These advantages are global. Hence the additional costs of the incentives for early deployment should be considered learning investments; they must be wisely spent and need to be widely shared”.

 

strong>Solar energy electrical Projects are available at

Asoka Technologies

For more projects visit our website www.asokatechnologies.in and blogspot www.asokatechnologies.blogspot.com