This paper presents a robust control strategy to improve dc-link voltage control performances for Grid connected Converters (GcCs). The proposed control strategy is based on an adaptive PI controller and is aimed to ensure fast transient response, low dc-link voltage fluctuations, low grid current THD and good disturbance rejection after sudden changes of the active power drawn by the GcC. The proportional and integral gains of the considered adaptive PI controller are self-tuned so that they are well suited with regard to the operating point of the controlled system and/or its state. Several simulation and experimental results are presented to confirm and validate the effectiveness and feasibility of the proposed dc-link voltage control strategy.
- DC-link voltage control
- adaptive PI controller
- Grid connected Converters
Fig. 1. Commonly used control structure for Grid-connected Converters
EXPECTED SIMULATION RESULTS
Fig. 2. Simulation results (ξ=0.7, Vdc init=100V, Vdc *=150, i=0 at t=0s and i=Imax at t=0.5s) (a) Comparison between standard PI control and adaptive PI control (b) waveform of the selected ωn value for the adaptive PI controller
This paper presented an improved dc-link voltage controller based on an adaptive PI controller with an anti-windup process. The proportional and integral gains of the proposed PI controller are self-tuned so that the following constraints are satisfied: 1) no overshoot after step jumps of the dc-link voltage reference input; 2) fast dynamic response after step jumps of the dc-link voltage reference; 3) fast dynamic response after step jump of the input current i and 4) low grid current THD value during steady state operation. The considered control was experimentally tested on a prototyping platform. The obtained experimental results are quite similar to simulation results and show the effectiveness and reliability of the adopted control strategy.
 D. Casadei, M. Mengoni, G. Serra, A. Tani, and L. Zarri, “A control scheme with energy saving and dc-link overvoltage rejection for induction motor drives of electric vehicles,” IEEE Trans. Ind. Appl.,vol. 46, no. 4, pp. 1436–1446, Jul./Aug. 2010.
 Li, F., Zou, Y.P., Wang, C.Z., Chen, W., Zhang, Y.C., Zhang, J. “Research on AC Electronic Load Based on back to back Single phase PWM Rectifiers,” Applied Power Electronics Conference and Exposition, 2008. APEC 2008. Twenty-Third Annual IEEE. 2008, pp.630-634. 2008.
 M. Karimi-Ghartimani, S.A. Khajehoddin, P. Jain, A. Bakhshai, “A systematic approach to dc-bus control design in single phase grid connected renewable converters,” IEEE Trans. Power Electron, vol. 28, no. 7, pp. 3158–3166, July. 2013.
 X. Yuan, F. Wang, D. Boroyevich, Y. Li, and R. Burgos, “Dc-link voltage control of a full power converter for wind generator operating in weak-grid systems,” IEEE Trans. Power Electron., vol. 24, no. 9, pp. 2178–2192, Sep. 2009.
 C.-S. Lam, W.-H. Choi, M.-C. Wong, and Y.-D. Han, “Adaptive dc link voltage-controlled hybrid active power filters for reactive power compensation,” IEEE Trans. Power Electron., vol. 27, no. 4, pp. 1758– 1772, Apr. 2012.