STATCOM and DSTATCOM projects IEEE for BTech and Mtech using Matlab Simulink
|PROJECT CODE||PROJECT NAME|
|AT-S-1||Distributed voltage control with electric springs comparison with STATCOM|
|AT-S-2||Adaptive PI control of STATCOM for voltage regulation with Fuzzy Interfacing|
|AT-S-3||Analysis and simulation of a D-STATCOM for voltage quality improvement|
|AT-S-4||Design and simulation of cascaded H-bridge multilevel inverter based DSTATCOM for compensation of reactive power and harmonics|
|AT-S-5||A hybrid statcom with wide compensation range and low dc link voltage|
|AT-S-6||Voltage Sag Mitigation Using Multilevel Inverter based Distribution Static Compensator (DSTATCOM) in Low Voltage Distribution System|
|AT-S-7||Analysis and Control of DSTATCOM for a Line
|AT-S-8||Control of Cascaded H-Bridge Converter based
DSTATCOM for High Power Applications
|AT-S-9||Inverter topologies for DSTATCOM applications—a simulation study|
|AT-S-10||Modeling and Simulation of a Distribution STATCOM using Sirnulink’s Power System Blockset|
STATCOM AND DSTATCOM PROJECTS
A static synchronous compensator (STATCOM), also known as a static synchronous condenser (STATCON), is a regulating device used on alternating current electricity transmission networks. It is based on a power electronics voltage-source converter and can act as either a source or sink of reactive AC power to an electricity network. If connected to a source of power it can also provide active AC power. It is a member of the FACTS family of devices. It is inherently modular and electable.
These compensators are also usable to reduce voltage fluctuations.
A DSTATCOM is a shunt compensation device that provides an effective solution for reactive power compensation and voltage regulation. It comprises of a Voltage Source Converter (VSC), a DC capacitor, a coupling inductor or coupling transformer and a controller.