Maximum power point trackers are so important in photovoltaic systems to increase their efficiency. Many methods have been proposed to achieve the maximum power that the PV modules are capable of producing under different weather conditions. This paper proposed an intelligent method for maximum power point tracking based on fuzzy logic controller. The system consists of a photovoltaic solar module connected to a DC-DC Buck-boost converter. The system has been experienced under disturbance in the photovoltaic temperature and irradiation level. The simulation results show that the proposed maximum power tracker could track the maximum power accurately and successfully in all condition tested. Comparison of different performance parameters such as: tracking efficiency and response time of the system shows that the proposed method gives higher efficiency and better performance than the conventional perturbation and observation method.
Fig. 1: System used for simulation.
EXPECTED SIMULATION RESULTS:
Fig. 2: case 1: changing the solar radiation
Fig. 3: Case 1: performance of FLC method
Fig. 4: Case I: performance of P&O method
Fig, 5: Case 2: changing the solar radiation
Fig, 6: Case 2: performance of FLC method
Fig, 7: Case 2: performance of P&O method
Fig, 8: Changing the temperature
Fig, 9: Performance of FLC method
Fig, 10: Performance of P&O method
Photovoltaic model using Matlab/STMULTNK and design of appropriate DC-DC buck-boost converter with a maximum power point tracking facility are presented in this paper. A new method for MPPT based fuzzy logic controller is presented and compared with the conventional P&O MPPT method. The models are tested under disturbance in both solar radiation and photovoltaic temperature. Simulation results show that the proposed method effectively tracks the maximum power point under different ambient conditions.The oscillation around MPP is decreased and the response is faster in compared with the conventional methods. Comparing the tracking efficiency of both methods indicates that the proposed method has a higher efficiency than the conventional P&O MPPT method.
 Jancarle L. Dos Santos, Fernando L. M. Antunes and Anis Chehab, “A Maximum Power Point Tracker for PV Systems Using a High Performance Boost Converter”, Solar Energy, Issue 7, Vol. 80, pp. 772- 778,2005.
 Ting-Chung Yu and Tang-Shiuan Chien, “Analysis and Simulation of Characteristics and Maximum Power Point Tracking for Photovoltaic Systems”, Conference,P prpo.c 1e3ed3i9n g- s1 3o4f4 ,PT aoiwpeeri, 2E0l0e9c.t ronics and Drive Systems
 Roberto Faranda, Sonia Leva, “Energy Comparison of MPPT techniques for PV Systems”, Wseas Transctions on Power System, Issue 6, Vol. 3, pp. 446-455, June 2008.
 D. P. Hohm and M. E. Ropp, “Comparative Study of Maximum Power Point Tracking Algorithms using an experimental, programmable, maximum power point tracking test bed”,P roceedings of Photovoltaic Specialists Conference ,pp. 1699 – 1702, USA,2000.
 Trishan Esram and Patrick 1. Chapman, “Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques”, Energy ConverSion, Issue 2, Vol. 22, pp. 439 – 449, May 2007.